Here at Townsend Bearings we have a wide range of Vee Belts, Wedge Belts a and Moulded Cog Belts available from stock. In comparison with other drive methods they provide the best combination of traction, speed of movement, long service life, and load of the bearings.
Vee Belts are available in A, B, C and D sections and are completely wrapped in fabric.
Wedge Belts are available in SPZ, SPA, SPB and SPC sections and are also completely wrapped in fabric.
Moulded Cog Belts are available in AX, BX, XPZ, XPA, XPB and XPC sections and are ‘raw’ on the sides, ie there is no fabric on the sides of the belt. For this reason they are also called Cogged Raw Edge Belts. Moulded Cog Belts are able to wrap around pulleys of smaller diameters than wrapped belts since the inside of the belts can close up easier without stressing the outside as much.
Banded belts are also available. These consist of multiple belts of the same size and section bonded together side by side with a common piece of rubber/fabric across the top surface.
All of our catalogues are available to download in PDF format. To view our catalogues see links to the main Belt Drive and Pulley catalogue and main Vee, Wedge and Cogged Belt sections below.
Belt Drives and Pulleys